Aqua-Mod™ Tank
With four sizes to choose from, there is an Aqua-Mod Tank for every
requirement. The range includes a 500 litre One Module, a 1000 litre Two
Module, an 870 litre Three Module, and a 2000 litre Four Module Tank
Taps
The
One, Two and Four Module Tanks are supplied with a 3/4” outlet and tap,
while the Three Module Tank has a 1/2” outlet and tap. All Aqua-Mods are
supplied with an inbuilt filter, a 400mm x 400mm inspection point with a
cover, and all inlets and outlets are protected with mosquito proof wire.
Easy Maintenance
Below are a few simple tips to help you get the most out of your Stratco rainwater tank.
- When installing your tank, ensure it is on a level, solid base.
- Do not store the tank on its side.
- Flush the tank before use, this is very important when connecting a pump.
- Do not stand on the top of the tank as the lid is not designed to support weight.
- When attaching the tap, use thread tape on the tap fitting and do not over tighten it.
- While the inlet filter provided with your tank will stop sticks and leaf debris entering the tank, it is also important to ensure the runoff area to the tank is free of debris.
- Clean the gutters every two months, or more regularly if trees overhang the roof.
- Remove any sludge from inside the tank when necessary.
- Do not scrub or scratch the interior surface of the tank because it has a protective coating covering the walls.
- Stratco tanks are produced from the highest quality materials and will provide many years of service if the important recommendations set out in the Stratco ‘Selection, Use and Maintenance’ brochure are followed.
Use Stratco rainwater calculator to see how you can save up to 100,000 litres of water a year.